SW120HP Hug & Plug Electronic Descaler
The SW120HP is an inline device (not a water filter) that uses an electromagnetic process to treat the water supply as it is being used. The result is water pipes, boilers, cylinders and kettles that do not scale up with lime. The SW120HP Electronic Descaler will treat your water supply economically, efficiently and maintenance free for many years, facilitating bulk precipitation of crystals rather than adhesion to the wall of appliances, pipes and vessels.
The anti-scale magnetic treatment or AMT of the hug and plug electronic descaler, helps reduce the technical and economic problems caused by scale deposits in water systems. Non-chemical water treatment technologies such as the SW120HP electromagnetic field (EMF) device, are now viable options so the use of scale inhibitors, anti-scalants, or other chemical involved processes can be avoided or minimized.
In order to maximize the results, it is advisable to install the device based on the pipe size or flow rate. We will do this in an approximate calculation according to the diameter of the pipe as follows:
For pipe sizes from 3/8″ to 1.25″ (capacity of up to 10 m3/hour) – one (1) SW120HP device recommended
For pipe sizes from 1″ to 2.25″ (capacity of up to 20 m3/hour) – two (2) SW120HP devices recommended
For pipe sizes from 2″ to 3″ (capacity of up to 40 m3/hour) – four (4) SW120HP devices recommended
Features & Benefits
- Reduces existing lime scale and rust
- Reduces bacterial colonies
- Eliminates further limescale formation
- Does not impair the pH and hardness of the water
- Does not harm important minerals such as calcium and magnesium
- Suitable for all types of water piping
- Suitable for work with all types of electrical voltage
- Easy to assemble and install
- Does not require replacement parts
- Does not require periodic care
- Body made of strong aluminum – not plastic
- Can be transferred to another location if required
- Blue control light that confirms the normal operation of the system
- Suitable for pipe diameter of 3/8″ up to 3″
- Does not cause leaks or contamination in the plumbing like a standard water filter
Simple DIY (Hug and Plug) Installation
The unit can be fitted simple and easily to any water pipe up to 3 inches diameter without tools or equipment. Just hug the device on the water pipe and plug into a nearby electrical outlet. Once the blue indicator light is on, the unit is treating water flowing inside the pipe at that location.
The SW120HP requires only a low 12 volts of electricity to operate and suitable for use in all electric standards worldwide.